How long is SNOO under warranty for?
HBI warrants the Product against defects in materials and workmanship under normal use for a period of twelve (12) months from the date of shipment (“Warranty Period”).
Why is SNOO not connecting?
Make sure your WiFi button is clicked into the platform. Reboot your SNOO (plug out for 30 seconds and plug back in) Open the app and follow the on-screen prompts until you reach the Join SNOO Network page. At the Join SNOO’s Network pop-up, click Join and go out of the app into your device’s WiFi settings.O
Have there been any deaths in the SNOO?
Tens of thousands of babies have logged over 50 million hours in the Snoo with no reported deaths, according to data provided by Happiest Baby. Statistically speaking, some of those babies should have died. Eventually, one likely will, says Karp, matter-of-factly.O
Where is WiFi button on SNOO?
That button is found underneath the SNOO, on the same side of the bed as the Activity Button (the one you press to turn the bed on and off). The Wi-Fi switch is the smaller of the 2 buttons and can be turned off simply by pressing it so that it pops out.
How do I sync my SNOO with WiFi?
– Head over the Setting icon at the bottom of your screen. – Under the Devices category, click on Baby’s SNOO. – Click on Connection Status > Change Network to pair to another WiFi network or reconnect to your home’s network.
How do I activate SNOO without the app?
Press the activity button on the front of SNOO. The button will blink white for about a minute as the bed’s computer “boots up.” Once it stops blinking, push the button. The light will turn blue and SNOO will turn on.
How do I change settings on SNOO?
To manually increase the level of sound/motion, simply press and hold the power button for a few seconds. The button will change color and SNOO will go up a level. (See chart below for a description of the colors indicating each level.) You can also change the sound/motion by connecting SNOO to the Mobile App.
How do I reset my SNOO?
– Head over to the Setting icon at the bottom of your screen. – Under the Devices category, click on Baby’s SNOO to begin. – At the bottom, you will select Unpair SNOO to reset and follow the on-screen prompts.
How do you reset a SNOO bassinet?
– Head over to the Setting icon at the bottom of your screen. – Under the Devices category, click on Baby’s SNOO to begin. – At the bottom, you will select Unpair SNOO to reset and follow the on-screen prompts.
How do you disassociate SNOO?
– Head over to the Setting icon at the bottom of your screen. – Under the Devices category, click on Baby’s SNOO to begin. – At the bottom, you will select Unpair SNOO to reset and follow the on-screen prompts.
How do you reboot SNOO?
Happiest Customer Care Team If you want to reboot your SNOO, just unplug its power adapter from the wall outlet. Wait a few seconds, then plug SNOO back in. The SNOO activity button will flash white while rebooting. It may take several minutes before it stays on white.O
Why is my SNOO not working?
To remedy this for mobile devices: Reboot your SNOO (plug out for 30 seconds and plug back in) Open the app and follow the on-screen prompts until you reach the Join SNOO Network page. At the Join SNOO’s Network pop-up, click Join and go out of the app into your device’s WiFi settings.O
Where is SNOO barcode?
The serial number is a 16-digit number that can be found on a label underneath the SNOO near the power source, or on your SNOO warranty card.
Can you transfer SNOO warranty?
The warranty applies to original purchaser only and is not transferable. Using the product outside any of the approved countries above or purchasing it through an unauthorized re-seller automatically voids the limited warranty and any other applicable warranties.O
Where is the SNOO barcode?
Happiest Customer Care Team This is a 16-digit number printed on a label under SNOO near where the power cord plugs in.O